Unpack and connect the device
2.3 Unpacking and checking the delivery
Flat Panel
8 Operating Instructions (Compact), 09/2008, A5E02313712-01
High frequency radiation
CAUTION
Unintentional operating situations
High frequency radiation, for example from a cell phone, may cause unintentional operating
situations. For more details, consult the technical data in the "EMC requirements" chapter.
2.3 Unpacking and checking the delivery
Procedure
1. Please check the packaging material for transport damage upon delivery.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
3. Unpack the device.
4. Keep the packaging material in case you have to transport the unit again.
NOTICE
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
5. Please keep the enclosed documentation in a safe place. You will need the
documentation when you start up the device for the first time.
6. Check the package contents for completeness and any visible transport damage. Check
for completeness using the enclosed "Contents of Delivery" list.
7. Notify the delivery service in charge immediately if the packages contents are incomplete
or damaged.
WARNING
Make sure that a damaged device is not installed nor put into operation.
8. Note the identification information as described in the "Operating Instructions (compact)"
document.
To Next Page
Loading...
