Siemens SIMATIC 6DL1131-6DF00-0PK0 - Page 22

Article number 6DL1131-6DF00-0PK0
Input characteristic curve in accordance with
IEC 61131, type 1
Yes
Input characteristic curve in accordance with
IEC 61131, type 3
Yes
Time stamping Yes; Resolution 10 ms
Time stamp (with precision of 1 ms) Yes; Resolution 1ms
Input voltage
● Type of input voltage
DC
● for signal "0"
-125 ... +5 V
● for signal "1"
+11 ... +125 V
Input current
● for signal "1", typ.
3.1 mA
Input delay (for rated value of input voltage)
for standard inputs
– parameterizable
Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
(in each case + delay of 30 to 500 µs, depending
on line length)
Cable length
● shielded, max.
1 000 m
● unshielded, max.
600 m
Encoder
Connectable encoders
● 2-wire sensor
Yes
– permissible quiescent current (2-wire
sensor), max.
1.5 mA
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm
Yes
● Hardware interrupt
Yes; Parameterizable, channels 0 to 7, rising/fall‐
ing edge
Diagnostic messages
● Diagnostic information readable
Yes
● Monitoring the supply voltage
Yes
● Wire-break
Yes; channel by channel
● Group error
Yes
Diagnostics indication LED
● MAINT LED
Yes; yellow LED
● Monitoring of the supply voltage (PWR-LED)
Yes; green PWR LED
● Channel status display
Yes; Green LED
● for channel diagnostics
Yes; Red LED
● for module diagnostics
Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels
No
Technical specifications
Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)
22 Manual, 11/2017, A5E39288633-AB