Description
The BusAdapter BA 2×RJ45 is designed as follows:
① LED LK 1 - Status of the Ethernet connection port 1
② LED LK 2 - Status of the Ethernet connection port 2
③ Connection diagram for the PROFINET connectors (view from below)
④ Fixing screw
⑤ Tightening torque
Note
The gure below is a basic representation using the ET 200SP HA as an example; it is also valid
for other distributed I/O devices.
The mounted BusAdapter BA 2xLC appears as follows:
Installation
4.6 BusAdapter BA 2xRJ45
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 25
To Next Page
Loading...
