Siemens simatic ET 200MP - Page 22

Parameters/address space
4.2 Parameters
Analog Input Module AI 8xU/I/R/RTD BA (6ES7531-7QF00-0AB0)
Manual, 03/2019, A5E44792324-AA
21
The following parameter settings for the channels are possible:
Table 4- 2 Configurable parameters and their defaults
Parameters
Range of values
Default
setting
Parameter as-
signment in
RUN
Scope with configuration software,
e.g., STEP 7 (TIA Portal)
GSD file
PROFINET IO
GSD file
PROFIBUS DP
Diagnostics
• Overflow
Yes/No No Yes Channel Module
2)
• Underflow
Yes/No No Yes Channel Module
2)
• Common mode error
Yes/No No Yes Channel Module
2)
• Wire break
1)
Yes/No No Yes Channel Module
2)
Measuring
• Measuring type
See chapter Meas-
uring types and
ranges (Page 18)
Voltage Yes Channel Channel
• Measuring range
±10 V Yes Channel Channel
• Temperature coefficient
Pt: 0.003851
Pt: 0.003902
Pt: 0.003916
Pt: 0.003920
Ni: 0.00618
Ni: 0.00672
LG-Ni: 0.005000
0.003851 Yes Channel Channel
• Temperature unit • Kelvin (K)
• Fahrenheit (°F)
• Celsius (°C)
°C Yes Channel Module
• Interference frequency
suppression
400 Hz
60 Hz
50 Hz
10 Hz
50 Hz Yes Channel Module
• Smoothing
None/low/medium/hi
gh
None Yes Channel Channel