Siemens simatic ET 200MP - Analog Inputs; Input Ranges (Rated Values), Voltages

Analog Input Module AI 8xU/I/R/RTD BA (6ES7531-7QF00-0AB0)
36 Manual, 03/2019, A5E44792324-AA
Technical specifications
6
Technical specifications of AI 8xU/I/R/RTD BA
The following table shows the technical specifications as of 03/2019. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7531-7QF00-0AB0/td?dl=en
).
Article number
6ES7531-7QF00-0AB0
General information
Product type designation
AI 8xU/I/R/RTD BA
HW functional status
FS01
Firmware version
V1.0.0
• FW update possible
Yes
Product function
• I&M data
Yes; I&M0 to I&M3
Engineering with
• STEP 7 TIA Portal configurable/integrated
as of version
V15.1 / V16
• STEP 7 configurable/integrated as of ver-
sion
V5.5 SP3 / -
• PROFIBUS as of GSD version/GSD revi-
sion
V1.0 / V5.1
• PROFINET as of GSD version/GSD revi-
sion
V2.3 / -
Operating mode
• Oversampling
No
• MSI
Yes
CiR – Configuration in RUN
Reparameterization possible in RUN
Yes
Calibration possible in RUN
No
Power
Power available from the backplane bus
0.85 W
Power loss
Power loss, typ.
0.9 W