Siemens simatic ET 200MP - C.1 Representation of Input Ranges

Analog Input Module AI 8xU/I/R/RTD BA (6ES7531-7QF00-0AB0)
52 Manual, 03/2019, A5E44792324-AA
Representation of analog values
C
Introduction
This appendix shows the analog values for all measuring ranges supported by the AI
8xU/I/R/RTD BA analog module.
Measured value resolution
Each analog value is written left aligned to the tags. The bits marked with "x" are set to "0".
Note
This resolution does not apply to
temperature values. The digitalized temperature values are
the result of a conversion in the analog module.
Table C- 1 Resolution of the analog values
Resolution in bits
including sign
Values
Analog value
Decimal
Hexadecimal
High byte
Low byte
16
1
1
H
Sign 0 0 0 0 0 0 0
0 0 0 0 0 0 0 1