Parameters/address space
4.3 Declaration of parameters
Analog Input Module AI 8xU/I/R/RTD BA (6ES7531-7QF00-0AB0)
24 Manual, 03/2019, A5E44792324-AA
The following figure shows the number of module cycles after which the smoothed analog
value is almost 100%, depending on the set smoothing. It is valid for each signal change at
the analog input.
Figure 4-3 Smoothing for AI 8xU/I/R/RTD BA
Hardware interrupt 1 or 2
Enabling of a hardware interrupt at violation of high limit 1 or 2 or low limit 1 or 2.
Low limit 1 or 2
Specifies the low limit threshold that triggers hardware interrupt 1 or 2.
High limit 1 or 2
Specifies the high limit threshold that triggers hardware interrupt 1 or 2.
To Next Page
Loading...
