Siemens SIMATIC ET 200S Function Manual

Preface
Contents of this Function Manual
This document is a component of the SIMOTION Programming - References documentation
package.
This documentation is a supplement to the SIMATIC
ET 200S FC Frequency Converter
Operating Instructions (03/2005 Edition).
This documentation is supplied with the SIMOTION SCOUT in electronic form!
This manual describes how you can control the ET 200S frequency converter with the aid of
the _ET200S_FC_control function block (Article No.: 6SL3244-0SA00-1AA0) from a
SIMOTION device.
Function block
The _ET200S_FC_control function block is used for the communication between the
SIMOTION system and the ET 200S frequency converter and is a component of the command
library of the "SIMOTION SCOUT" engineering system.
SIMOTION Documentation
An overview of the SIMOTION documentation can be found in the SIMOTION Documentation
Overview document.
This documentation is included as electronic documentation in the scope of delivery of
SIMOTION SCOUT. It comprises ten documentation packages.
The following documentation packages are available for SIMOTION V4.4:
● SIMOTION Engineering System Handling
● SIMOTION System and Function Descriptions
● SIMOTION Service and Diagnostics
● SIMOTION IT
● SIMOTION Programming
● SIMOTION Programming - References
● SIMOTION C
● SIMOTION P
● SIMOTION D
● SIMOTION Supplementary Documentation
Supplement for the ET 200S frequency converter
Function Manual, 01/2015 3

Siemens SIMATIC ET 200S Specifications

General

Brand	Siemens
Model	SIMATIC ET 200S
Category	I/O Systems
Language	English