Siemens SIMATIC ET 200SP Product Information

Module overview of ET 200SP
1.7 Accessories
Product information on the documentation of the ET 200SP distributed I/O system
Product Information, 02/2021, A5E03799595-BG
29
Accessories, color identification labels
(push-in terminals) PotDis
Packaging unit Article number
PotDis-TB-BR-W, 18 potential terminals
• Yellow/green (terminals 1 to 18); color
code CC11
Pack of 10
6ES7193-6CP11-2MT0
• Red (terminals 1 to 18); color code CC12
Pack of 10
6ES7193-6CP12-2MT0
• Blue (terminals 1 to 18); color code CC13
Pack of 10
6ES7193-6CP13-2MT0
• Gray (terminals 1 to 18); color code CC10
Pack of 10
6ES7193-6CP10-2MT0
PotDis-TB-n.c.-G, 18 potential terminals
• Gray (terminals 1 to 18); color code CC10
Pack of 10
6ES7193-6CP10-2MT0
Accessories for motor starter
Packaging unit
Article number
3DI / LC module
Pack of 1
3RK1908-1AA00-0BP0
Fan
Pack of 1
3RW4928-8VB00
Additional mechanical bracket for BaseUnit
Pack of 1
3RK1908-1EA00-1BP0
Cover for an empty BaseUnit
Pack of 1
3RK1908-1CA00-0BP0
Touch protection cover for infeed bus
Pack of 1
3RK1908-1DA00-2BP0

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C