Siemens SIMATIC ET 200SP Product Information

Module overview of ET 200SP
1.7 Accessories
Product information on the documentation of the ET 200SP distributed I/O system
30 Product Information, 02/2021, A5E03799595-BG
Technical specifications BU Cover
Article number
6ES7133-6CV20-1AM0
General information
Product type designation
BU cover
Ambient conditions
Ambient temperature during operation
• horizontal installation, min.
-40 °C
• horizontal installation, max.
60 °C
• vertical installation, min.
-40 °C
• vertical installation, max.
50 °C
Altitude during operation relating to sea level
• Installation altitude above sea level, max.
5 000 m; Restrictions for installation altitudes > 2
000 m, see manual
Dimensions
Width
20 mm
Height
73 mm
Depth
35.3 mm
Article number
6ES7133-6CV15-1AM0
General information
Product type designation
BU cover
Ambient conditions
Ambient temperature during operation
• horizontal installation, min.
-40 °C
• horizontal installation, max.
60 °C
• vertical installation, min.
-40 °C
• vertical installation, max.
50 °C
Altitude during operation relating to sea level
• Installation altitude above sea level, max.
5 000 m; Restrictions for installation altitudes > 2
000 m, see manual
Dimensions
Width
15 mm
Height
73 mm
Depth
35.3 mm

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C