Siemens simatic hmi op7 - Page 130

16-2
Equipment Manual OP7, OP17
Release 04/99
The OP7 is available in versions PP , DP and DP-12. The versions dif fer only
in as far as their communication options are concerned (refer to table 16-1).
Figure 16-1 shows the connection elements on the underside of the OP7.
IF 1B
IF 1A
  
Figure 16-1 Locations of the Connection Elements on the Underside of the OP7
Table 16-1 Communication Options Featured by Different OP7 Versions
Connections OP7
PP DP DP-12
SIMATIC S5
– AS51 1 (TTY)
– F AP (TTY/RS232)
– PROFIBUS-DP up to 1.5 MBd
– PROFIBUS-DP up to 12 MBd
IF 1A
IF 1A
—
—
—
—
IF 1B
—
IF 1A
IF 1A
IF 1B
IF 1B
SIMA TIC S7/M7
– PPI
– MPI
– PROFIBUS-DP up to 1.5 MBd
– PROFIBUS-DP up to 12 MBd
—
—
—
—
IF 1B
IF 1B
IF 1B
—
IF 1B
IF 1B
IF 1B
IF 1B
SIMA TIC 500/505
– RS232
– RS422/RS485
IF 1A
IF 1B
—
—
IF 1A
IF 1B
Other PLCs
– RS232/TTY
– RS422/RS485
IF 1A
IF 1B
—
—
IF 1A
IF 1B
PC/PU (TTY) IF 1A — IF 1A
PC/PU (RS232) IF 1A IF 1A IF 1A
Printer (TTY) IF 1A — IF 1A
Printer (RS232) IF 1A IF 1A IF 1A
Connection
elements