Siemens SIMATIC IPC427D Operating Manual

BIOS Setup (SCU)
3.4 Advanced menu
BIOS Description
Operating Manual, 05/2016, A5E33664825-AB
19
Parameter
Meaning
WLAN
5
Enabled The WLAN transceiver is always switched on after
the power-up.
Last State After the power-up the WLAN transceiver again
assumes the status it had before the last
shut-down.
Disabled The WLAN transceiver is always switched off after
the power-up.
Cardbus + SD-Card
5
The storage device is switched on (Enabled) or switched off (Disabled).
Touchpad
5
The touchpad is switched on (Enabled) or switched off (Disabled).
1
Only with IPC2x7
2
Depending on the ordered device configuration
3
Only available if an Azalia HD audio controller is installed.
4
Only with IPC6x7 and IPC8x7
5
Only with Field programming device
6
Not with Field programming device
7
Only if approved
"SATA / IDE Configuration" submenu

Siemens SIMATIC IPC427D Specifications

General

Brand	Siemens
Model	SIMATIC IPC427D
Category	Industrial PC
Language	English