Siemens SIMATIC IPC477E Product Information

SIMATIC IPC477E frameless
22 A5E50148832-AA, 10/2020
Environmental conditions
Climatic ambient conditions
Permitted ambient temperature during operation
Temperature, tested according to IEC 60068-2-1, IEC 60068-2-2
At an ambient temperature > 40 °C, the device must be operated in an operating area in accordance with RAL.
When installed vertically in horizontal format
+0 to +45 °C
When installed inclined in horizontal format,
Vertical inclination max. ± 45°
+0 to +40 °C
When installed upright in vertical format,
Display rotated 90° vertical from the standard position
(Power supply is located at the top)
+0 to +40 °C
Temperature during storage/transport
Gradient
-20 °C to +60 °C
Operating mode: Max. 10 K/h; no condensation
Storage: Max. 20 K/h; no condensation
Note: For the "Performance Optimized" setting (see operating instructions for the standard devices, section "Assigning CPU
power consumption parameters"), the ambient temperature must be reduced by 9 °C when installed inclined and 5 °C in all
other mounting positions.
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
Operation
5 ... 85% at 30 °C, no condensation
Storage/transport
5 to 95 % at 25/55 °C, no condensation
Air pressure, in accordance with IEC 60068-2-13
Operation
1080 hPa to 795 hPa, corresponds to an elevation of 1000 m to 2000 m
Storage/transport
1080 hPa to 660 hPa, corresponds to an elevation of 1000 m to 3500 m
Protection against foreign objects and water
Degree of protection
Explanation
Front
When correctly installed: IP65 degree of protection possible.
Rear panel
IP00
No protection against contact with standard probes. No protection against ingress of
water.
Mechanical ambient conditions
Vibration, tested according to DIN IEC 60068-2-6
Operation
10 Hz to 58 Hz: 0.0375 mm
58 Hz to 200 Hz: 4.9 m/s
2
Storage/transport
5 to 8.4 Hz: 3.5 mm
8.4 Hz to 500 Hz: 9.8 m/s
2
Shock resistance, tested in accordance with IEC 60068-2-27, IEC 60068-2-29
Operation
100 m/s
2
, 6 ms, 100 shocks per axis
Storage/transport
250 m/s
2
, 6 ms
Technical Support
Technical support for the products covered in the manual is available in the Internet at:
• Technical support (https://support.industry.siemens.com/cs/ww/en/
)
• Support Request (http://www.siemens.com/automation/support-request)
• Service (http://support.automation.siemens.com/WW/view/en/16604318)
• Contact persons and office locations (http://www.automation.siemens.com/mcms/aspa-db/en/Pages/default.aspx)
• Training center (http://sitrain.automation.siemens.com/sitrainworld/?AppLang=en)
Additional information on SIMATIC products is available in the Internet at:
• Industry Portal (http://www.automation.siemens.com/_en/portal/index.htm
)
• SIMATIC Documentation Collection (http://www.siemens.com/simatic-tech-doku-portal)
SIMATIC IPC477E frameless
A5E50148832-AA, 10/2020
Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY

Siemens SIMATIC IPC477E Specifications

General

Brand	Siemens
Model	SIMATIC IPC477E
Category	Industrial PC
Language	English