Siemens SIMATIC NET SCALANCE XR-300 - Page 51

Requirements
For the four-point mounting, you require the following:
• 4 suitable brackets
• 4 recessed head screws (M3 x 6) per mounting bracket for fastening the mounting bracket
to the device
• 2 suitable half-round screws (6 mm diameter) per mounting bracket for fastening the
mounting bracket to the base.
Mounting bracket
For the four-point mounting, you require special mounting brackets. You will 󹪝nd the design
drawings for constructing the mounting brackets in the section "Mounting brackets for use on
ships (Page102)". You can order four mounting brackets as accessories or manufacture them
yourself according to the design drawings.
The brackets for left and right are identical.
Installing and removing
5.4Four-point mounting
SCALANCE XR-300
Operating Instructions, 03/2023, C79000-G8976-C586-02 51