Siemens SIMATIC NET TeleControl S7-1200 CP 1243-1 User Manual

Application and properties
1.7 Requirements for use
CP 1243-1
Operating Instructions, 12/2016, C79000-G8976-C365-02
19
Application example: Telecontrol communication with TCSB
In the S7-1200 station:
● CPU with firmware version: 4.x
● Mobile wireless router SCALANCE M812
In the master station:
● PC with TCSB (version V3)
● Mobile wireless router SCALANCE M816
For more detailed information on the structure of TCSB , refer to the section /3/ (Page 110).
● When using online functions: Engineering station with STEP 7 (refer to the section
Software requirements (Page 19)).
For the configuration of the S7 station with CP:
Engineering station with STEP 7
1.7.2
Software requirements
Software for configuration and online functions
To configure the CP, the following configuration tool is required:
● STEP 7 Basic / Professional V13.0 with support package 0093
or
● STEP 7 Basic / Professional V13.0 + SP1
To use all the functions of the CP with the firmware version mentioned in the preface, the
following configuration tool is required:
● STEP 7 Basic / Professional V14

Siemens SIMATIC NET TeleControl S7-1200 CP 1243-1 Specifications

General

Compatible Controllers	S7-1200
Interface	Ethernet
Power Supply	24 V DC
Number of Possible Connections	8
Mounting Type	DIN rail
Weight	200 g
Data Transfer Rate	10/100 Mbps
Protocols	TCP/IP, UDP, DNP3, IEC 60870-5-104
Supply Voltage	20.4 ... 28.8 V DC
Current Consumption	100 mA
Operating Temperature	-20 ... +60 °C