Siemens SIMATIC RF1070R - Page 19

2 Engineering of the STEP 7 Program
Reading out UID with SIMATIC RF1070R
Article ID: 109780625, V1.0, 09/2020
19
© Siemens AG
2020 All rights reserved
The following table shows the error messages that occurred in the internal point-to-
point instructions "Port_Config", "Send_P2P" and "Receive_P2P".
Table 2-6
"diagnostics.subfunctionStatus"
Point-to-point instruction
16#80xx
Error messages that occurred in the internal point-
to-point instructions "Port_Config", "Send_P2P"
and "Receive_P2P".
Note:
For detailed information, refer to the Online Help
for the instruction in question.
16#81xx
16#82xx
16#83xx
16#89xx
16#8Axx