Siemens SIMATIC RF1070R - Page 30

5 Useful information
Reading out UID with SIMATIC RF1070R
Article ID: 109780625, V1.0, 09/2020
30
© Siemens AG
2020 All rights reserved
Table 5-10 Response telegram with errors
Byte
Value
Description
0
0x8C
Without checksum
0x9C
With checksum
1
0x01
DevCode of the command set containing the command to be called.
2
0x01
CmdCode of the command to be called.
3
0x01
Parameter length
4
0x00
5
0x02
CARD_NOT_SELECTED_ERR
6
0x9F
Optional checksum (when the value "0x9C" is set in byte 0)
Note
You can find a detailed description of the implementation of system jobs in
manual number \3\.