Siemens SIMATIC RF660M - Tag Editor Menu

"SIMATIC Mobile Reader" app
5.4 Functions
Mobile reader SIMATIC RF660M
40 Operating Instructions, 02/2022, C79000-G8976-C660-01
Functions/
parameter
Description
Tags found
Output field that shows the number of transponders found in the currently
running or most recently started scan operation.
Velocity
Output field that shows the number of transponders found per second in the
currently running or most recently started scan operation.
Scan/Stop
Button to start/stop scanning
Note: Scanning is automatically stopped after 120 seconds to avoid overheating
of the head module.
5.4.2 "Tag Editor" menu
In the "Tag Editor" menu, you can read data from a target transponder, change it and write to
the target transponder. You can lock memory areas, assign Access and Kill passwords, and
'kill' the transponder.
This menu is divided into the following tabs:
• Target
• Write
• Read
• Disable