"SIMATIC Mobile Reader" app
5.5 "Settings" menu
Mobile reader SIMATIC RF660M
54 Operating Instructions, 02/2022, C79000-G8976-C660-01
Table 5- 10 Parameters of the "Logbook" menu
Slider for enabling/disabling the logbook
If this function has been enabled, all results of the scan operation are entered in
the logbook.
Note that the logbook is created as ring buffer (for up to 8,000 individual
transponders).
Note: This function corresponds to the "Logging activated" parameter in the
on
Display of when the logbook was created. The date and time of the first scan
performed that was entered in the current logbook or because of which the
logbook was created are specified as start time.
Number of entries that were saved in the logbook.
Button to export the logbook
The logbook is saved as *.csv file.
You can find a detailed description of the procedure to export the logbook below
Button for resetting the logbook
Requirements
• The charging/docking station is connected to the power supply.
• The mobile reader is in the charging/docking station.
• A USB stick is inserted in the charging/docking station.
"Export logbook" procedure
Follow these steps to export the logbook:
1. In the "Settings > Logbook" menu, click the "Export logbook" button.
Reaction: The "Downloads" folder opens.
2. Use the
button to select the desired storage path.
Select the USB stick as storage location.
You may need to show the internal memory first using the button
.
3. If necessary, change the file name.
4. At the bottom right, right the "SAVE" button or the
icon.
Result: The logbook file is saved on the USB stick.
To Next Page
Loading...
