Siemens SIMATIC S5 Instructions

1-6
SIMATIC S5
C79000-G8576-C471-04
1.6 Notes on the CE Symbol
The following applies to the SIMATIC product described in this manual:
This product fulfils the requirements for the EC directive 89/336/EEC on
“electromagnetic compatibility” and the following fields of application
apply according to this CE symbol:
Field of Application
Requirement for
Emitted Interference Noise Immunity
Industry EN 50081-2: 1993 EN 50082-2: 1995
This product fulfils the requirements for the EC directive 73/23/EEC on
“low voltage” and was tested to EN60950.
The EC declarations of conformity and the documentation relating to this
are available to the authorities concerned, according to the above EC
directive, Article 10 (1), from:
Siemens Aktiengesellschaft
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsbereich Industrie-Automatisierungssysteme
Postfach 4848
D-90327 Nuernberg
Products which are not marked with the CE Symbol fulfill the
requirements and standards specified in the “Technical Data” section.
The setup guidelines and notes on safety given in the manual must be
observed on startup and during operation.
EMC Directive
Low Voltage
Directive
Declaration of
Conformity
Observing the
Setup
Guidelines
Technical Description

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)