Siemens Simatic S7-1500

Analog Input Module AI 8xU/R/RTD/TC HF (6ES7531-7PF00-0AB0)
4 Manual, 09/2016, A5E36647959-AB
Preface
Purpose of the documentation
This manual supplements the S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792) system manual.
Functions that relate in general to the systems are described in these system manuals.
The information provided in this manual and in the system/function manuals supports you in
commissioning the systems.
Changes compared to previous version
Compared to the previous version, this manual contains the following changes:
● As of firmware version V1.1.0, the module supports the scalable measuring range
function.
● Original texts of the license conditions and copyright notes for open-source software are
available on the Internet as of 09/2016.
Conventions
The term "CPU" is used in this manual both for the CPUs of the S7-1500 automation system,
as well as for interface modules of the ET 200MP distributed I/O system.
Please also observe notes marked as follows:
Note
A note contains important information re
garding the product described in the documentation
or its handling, or draws special attention to a section of the documentation.