6 "Cam/Cam Track” Technology Object
TOs of S7-1500(T)
Entry ID: 109743134, V1.0, 05/2017
Siemens AG 2017 All rights reserved
Figure 6-5 Hysteresis
6.1.4 Activation time
The activation time can define times for the two edges of a cam via which the
switching delays of the actuator can be compensate for the signal output. This
makes it possible to increase the precision of the cam output yet again in relation to
the respective position of the axis or the encoder.
Figure 6-6 Activation time
6.2 Cams (TO_OutputCam)
6.2.1 Instruction to influence cams
The output of an individual cam can be influenced from the user program with the
following instruction:
"MC_OutputCam”
Via the enable button of the function the cam output can be enabled or
blocked. Changes in the switching positons become instantly effective when
the cam output is enabled.
To Next Page
Loading...
