Name: Siemens Simatic series
Brand: Siemens
Rating: 5 (1 reviews)

Other manuals for Siemens Simatic series

Operating Instructions194 pages

Manual118 pages

Product Information12 pages

Quick Install Guide2 pages

Questions and Answers:

M
michellealexanderJul 27, 2025
What to do if Siemens Industrial PC is not operational?
- R
  rharrisJul 27, 2025
  If your Siemens Industrial PC is not operational, first, check the power supply, power cable, and power plug to ensure they are correctly connected and functioning. Also, verify that the on-off switch is in the correct position. Another potential cause is operation outside of specified ambient conditions; ensure these conditions are within the device's specifications. If the device was transported in cold weather, allow it to warm up for approximately 12 hours before turning it on.
U
utownsendJul 31, 2025
What to do if mouse pointer does not appear on Siemens Industrial PC screen?
- H
  hweeksJul 31, 2025
  If the mouse pointer does not appear on the screen of your Siemens Industrial PC, first verify that the mouse cable is properly connected to the system unit. If you are using an adapter or extension cable, check those connections as well. Also, check whether the mouse driver is properly installed and available when you start the user program.
S
Sue Patterson MDAug 4, 2025
What to do if the monitor remains dark on Siemens Industrial PC?
- A
  Ariana PhillipsAug 5, 2025
  If the monitor of your Siemens Industrial PC remains dark, ensure the monitor is switched on. If it's in power save mode, press any key on the keyboard. Check the brightness button and increase the brightness if it has been set too low. Verify that the power cord is properly connected to both the monitor and the power outlet, and that the monitor cable is securely connected to the system unit and the monitor.
C
Christopher CantuAug 9, 2025
What to do if USB device not responding on Siemens Industrial PC?
- N
  Natalie GoodwinAug 9, 2025
  If a USB device is not responding on your Siemens Industrial PC, the USB ports may be deactivated in the BIOS Setup. Try using a different USB port or activate the port in the BIOS. If the operating system does not support XHCI, activate the "PS/2 Emulation" setup parameter in the "Advanced > USB Configuration" menu of the BIOS Setup. If you connected USB-2.0/3.0 device, make sure that USB-2.0/3.0 is activated. If the operating system does not support the USB interfaces, activate the "Legacy USB Support" setup parameter in the "Advanced > USB Configuration" menu of the BIOS Setup. For other devices, ensure you have the necessary USB device drivers for your operating system.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)