EasyManuals Logo

Siemens Simatic series Getting Started

Siemens Simatic series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Application planning
3.2 Unpacking and checking the delivery unit
SIMATIC IPC847C
18 Getting Started, 12/2010, A5E02669190-02
Noting down the device identification data
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the following data in the table below:
Serial number: The serial number (S VP) is located on the rating plate either on the rear
panel of the device or on the inside of the front door.
Figure 3-1 Rating plate
Order number of the device
Device Ethernet address: The Ethernet address is printed on the device and is stored in
the BIOS Setup (F2 key) under "Advanced > Peripheral Configuration".
Microsoft Windows "Product Key" on the "Certificate of Authenticity" (COA). The COA
label is attached to the inside of the front door.
You may need the Product Key in case you reinstall the operating system.
Figure 3-2 COA label
Serial number: S VP ...
Order no. 6AGA114-1 ...
Microsoft Windows Product Key
Ethernet 1 address
Ethernet 2 address
CP 1616 onboard layer 2
Device equipment
The device equipment is listed on the inner side of the front door.

Other manuals for Siemens Simatic series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens Simatic series and is the answer not in the manual?

Siemens Simatic series Specifications

General IconGeneral
ProcessorIntel Core i3, Core i5, Core i7
Operating SystemWindows 10 IoT Enterprise, Linux
StorageSSD, HDD
InterfacesEthernet, USB, RS-232/485
PortsEthernet, USB, Serial
MountingDIN rail, wall
Protection ClassIP65
GraphicsIntegrated Intel HD Graphics
Expansion SlotsPCIe
Power Supply24V DC or 100-240V AC
Operating Temperature0°C to 50°C (depending on model)

Related product manuals