Siemens SIMATIC Operating Manual

Software description
3.5 Tools - Rightclick and WinMove
PDT IFP Monitor Standard
Operating Manual, 10/2017, A5E41104536-AB
25
3.5.2
Rightclick Selector
When you press the "Rightclick Selector" icon, the next mouse click or the next touch of the
touch screen is executed as a right-click.
Note
Delay time
There is no delay time in single
-touch mode: The right-click function is executed
immediately.
If the touch is used as
multi-touch, the right-
click function is executed with a specific delay. In
Windows 7 you can set the delay time with a slider, but you cannot reduce it to zero.
For a multi
-touch, Windows must be able to distinguish whether it is evaluating an operation
o
r a right-click that causes the delay time.
3.5.3
WinMove
"WinMove" allows you to move program windows vertically in order to display window areas
that extend beyond the display area. "WinMove" is mainly used on devices with a vertical
resolution of ≤ 600 pixels.
Procedure
1. Open "WinMove" using the Configuration Center.
The "WinMove" window with the "Up" and "Down" buttons is displayed.
2. Move the open program window using the "Up" and "Down" buttons.
Note
Unintentional reaction in Windows 10
WinMove also moves the desktop search option and the lock screen. Therefore, use
WinMove only in the active session.

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)