Siemens SIMATIC Operating Manual

Preface
PDT IFP Monitor Standard
4 Operating Manual, 10/2017, A5E41104536-AB
Style conventions
Style convention
Scope
"OK"
• User interface terms, for example, dialog names, tabs, buttons,
menu commands
• Required inputs, for example, limits, tag values.
• Path information
"File > Edit"
Operator actions, for example, menu commands, shortcut menu commands.
<F1>, <Alt+P>
Keyboard operation
Figures
This document contains figures of the software described. The figures can deviate slightly
from the supplied software.
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● SIMATIC
®
; SIMATIC HMI
®
; SIMATIC Industrial Flat Panel
®
; SIMATIC IPC
®
● WinCC
®
History
The following earlier release versions of these operating instructions have been published:
Edition
Comment
04/2016
First edition V1.1
01/2017 V1.2: Expansion by Touch/Key devices with resistive single touch screen,
"Information" tab, IFP ETH commissioning, amendments
10/2017 Remedy

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)