12.2010 Appendix
Siemens AG 6RX1700-0DD74 ENGLISH 91
SIMOREG DC-MASTER Converter Commutation Protector Operating Instructions
11.2 Relevant standards
EN 50178 Electronic equipment for use in power installations
EN 60068 Part 2 A93 Electrical engineering; basic environmental testing
techniques; checks
EN 61800 Part 1 Adjustable speed electrical power drive systems: General
requirements. Definition for the dimensioning of low-voltage
DC drive systems
EN 60146 Part 1 Semiconductor converters: General requirements and
special requirements for line-commutated converters
EN 60204 Machinery Directive
EN 60529 Part 4-2
A12.01
Degrees of protection; protection against contact, foreign
objects, and water for electrical equipment (EN 60529: 1991)
EN 60721 Electrical engineering; certification of environmental
conditions:
EN 61140
Part1 A08.03
Protection against electric shock
Classification of electrical and electronic equipment
EN 61800 Part 3 EMC product standard for adjustable speed drives
DIN VDE 0110 Part 1 and 2
A01.89
Insulation coordination for electrical equipment in low-
voltage systems
SN36350 Environmentally friendly product design
UL 508 C Power Conversion Equipment
ISO 14001:2004 Environmental management
11.3 Certification
The products listed in this document are manufactured and sold according to DIN ISO 9001.
The SIMOREG CCP complies with all of the requirements of UL 508, however has not been
certified.
11.4 Abbreviations, terminology
CE Communauté Européenne
cULus for ready-to-connect products, tested by UL in accordance with the UL and CSA
standards
UL Underwriters Laboratories
CCP Converter Commutation Protector
IGBT insulated gate bipolar transistor
To Next Page
Loading...
