Siemens SIMOTICS S-1FK7 - Decommissioning; Removing the Motor; Dismantling the Motor

Decommissioning and disposal
10.2 Decommissioning
1FK7 G2 synchronous motors
120 Operating Instructions, 05/2021, A5E50907562B AA
10.2 Decommissioning
10.2.1 Removing the motor
Removing the motor must be performed and/or supervised by qualified personnel with
appropriate expert knowledge.
Removing the motor from the machine
Procedure
1. Disconnect all electrical connections.
2. Remove all liquids such as oil, water.
3. Remove all supply lines.
4. Remove the fixing elements from the motor.
5. Transport the motor to a suitable location for storage and dismantling.
You have removed the motor.
❒
10.2.2 Dismantling the motor
Note
The rotor in a motor containing permanent magne
ts must only be removed by the
manufacturer.
Contact the Siemens Service Center.