Siemens SIMOTICS S-1FK7 - Options

Description of the motors
2.6 Mounting and options
1FK7 G2 synchronous motors
46 Operating Instructions, 05/2021, A5E50907562B AA
I
Current magnitude
t
Time
t 0
Opening time
t c1
Closing time
A
Brake open
Figure 2-8 Time-related terminology for holding operation
Holding torque M4
The holding torque M4 is the highest possible torque that can be applied to the closed brake
in steady-state operation without slip (holding function in a no-current state).
Dynamic braking torque M1 m
The dynamic braking torque M1 is the lowest average dynamic braking torque that can occur
for EMERGENCY STOP operation.
2.6.7 Options
The descriptions of the options are contained in the associated Configuration Manual
(
https://support.industry.siemens.com/cs/document/55379345?lc=de-
WW&pnid=13349&dl=en) of the motor