6. Inuence of network-connected and wireless communications systems, e.g. ripple-control
transmitters or data communication via the network or mobile radio, WLAN or Bluetooth.
7. Motors for use in potentially explosive areas:
When moving components such as bearings become worn, this can cause enclosure
components to exhibit unexpectedly high temperatures during operation, creating a hazard
in areas with a potentially explosive atmosphere.
For more information about the residual risks of the drive system components, see the
relevant sections in the technical user documentation.
Fundamental safety instructions for the SIMOTICS documentation
2.1Fundamental safety instructions
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 12/2023, A5E50610821B AF 23