Mounting and options
4
4.1 Safety symbols on the motor
The following warnings and notices are attached to the motor.
1 Notice "No impacts and no axial loads on the shaft end"
2 Warning symbol "Warning against hot surface"
3 WEEE mark
Dispose of the motor in accordance with WEEE Directive 2012/19/EU.
Note
Glue on the warning and information labels
If product warning and information labels are provided, attach them to the product so that they
are clearly visible.
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 12/2023, A5E50610821B AF 41
To Next Page
Loading...
