Siemens SINAMICS G120C DP

4 Operating the Application
4.4 Operator Control and Monitoring via monitoring table
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
28
Copyright  Siemens AG 2018 All rights reserved
No.
Action
Remarks
2.
Go online.
3.
For changing a value, you enter it in
the “Control value” column in the
respective line and tick the checkbox
on the right and start the process
with in the header.
For changing a Boolean tag you can
also proceed as follows:
Right-click the respective line and go to
“Control” (see picture).