Siemens SINAMICS G120C DP

5 Functional Mechanisms of this Application
5.2 Parameter access functionality
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
41
 Siemens AG 2018 All rights reserved
Figure 5-10 DB103 “answer_from_drive”
5.2.3 FB 20 “Parameters”
In the example, the parameter access occurs in FB “Parameters”. It is called
cyclically by OB Main.
Figure 5-11 FB “Parameters”
Actual alarms
Acknowledged alarms
Ramp-up time [s]
Ramp-down time [s]