Siemens SINAMICS G120C DP

6 Configuration and Settings
6.1 Creating the project configuration
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
46
 Siemens AG 2018 All rights reserved
No.
Action
Remarks
3.
Create a new project and
assign a name
(e.g.“G120_at_S7-1200”)
Inserting the SIMATIC S7-1200
4.
Double-click on “Add new
device”.
5.
1. Select “Controller”.
2. Select the desired
SIMATIC CPU.
3. Then click on “OK”.
6.
In the “Devices & Networks”
editor you go to the device
view of the SIMATIC CPU.
From the catalog you pull the
communication module
CM1243-5 to the first free slot
left next to the SIMATIC CPU
1
2
3
1
2