3. Pay attention to the center of gravity imprinted on the box ② and the imprinted position of
the ropes ③.
4. Carefully raise the transportation unit.
① Spreader beam
② Center of gravity
③ Imprinted position of the rope
Figure 4-5 Transporting a transportation unit (still in packaging) with a crane
See also
Transport with a fork-lift truck (Page 46)
Transport with a crane (Page 47)
4.4 Unpacking the cabinets
4.4.1 Removing the packaging
NOTICE
Material damage caused by incorrect storage of unpacked equipment
Proper packaging ensures that the equipment is protected. Unpackaged equipment may be
damaged if it is stored or out of service over a long period.
● Carefully comply with the instructions for storage in Chapters "Storage" and "Technical
data and drawings".
● Remove the packaging immediately prior to installation.
Preparations for use
4.4 Unpacking the cabinets
SINAMICS SH150 6SL3805
50 Operating Instructions 05/2020
To Next Page
Loading...
