Siemens SINAMICS V90 - 5 Operation of the Application; Scenario a

5 Operation of the application
5.1 Scenario A
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898, V1.0, 07/2016
17
 Siemens AG 2016 All rights reserved
5 Operation of the application
5.1 Scenario A
In scenario A, we use a “MOVE” instruction for programming and run the motor
with watch table:
Table 5-1
Nr.
Action
Remarks
1.
Open the organization block “Main [OB1]” from the program folder.