Siemens SINAMICS V90 - Hardware and Software Components; Validity; Used Components

2 Solution
2.2 Hardware and Software Components
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898, V1.0, 07/2016
6
 Siemens AG 2016 All rights reserved
2.2 Hardware and Software Components
2.2.1 Validity
This application example is valid for
 TIA Portal V13 SP1 and higher versions
 S7-300 CPU with PN interface
 SINAMICS V90 PN FW V10000.12
 SIMOTICS S-1FL6 Li motor
2.2.2 Used Components
The application was created with the following components:
Hardware components
Table 2-1 hardware components
Component
No.
Article number
Note
SIMATIC S7-300
CPU315F-2 PN/DP
1
6ES7315-2FH13-0AB0
V2.6
SINAMICS V90 PN
200V
1
6SL3210-5FB10-1UF0
V1.0.0.12
SIMOTICS S-1FL6 Li
motor
1
1FL6022-2AF21-1AA1
50W
Standard software components
Table 2-2 software components
Component
No.
Article number
Note
TIA Portal
1
V13 SP1
SINAMICS V-
ASSISTANT
1
V1.04.00.07
Sample files and projects
The table 2-3 includes all files and projects that are used in this example.
Table 2-3
Component
Note
109743898_CPU315F speed control V90 PN via
PROFINET Scenario A.zip
Project file for Scenario A
109743898_CPU315F speed control V90 PN via
PROFINET Scenario B.zip
Project file for Scenario B