Siemens SINAMICS V90 - 3 Basics; Basics Regarding SINAMICS V90 PN Version; Basic Parameter Configuration Regarding SINAMICS V90 PN; Configure PROFINET Settings Via SINAMICS V-ASSISTANT

To Next Page

To Previous Page

3 Basics

3.1 Basics regarding SINAMICS V90 PN version

Speed control with SINAMICS V90 and S7-300 via Profinet

Entry-ID: 109743898, V1.0, 07/2016

3 Basics

3.1 Basics regarding SINAMICS V90 PN version

SINAMICS V90 PN supports the following telegrams:

 Standard telegram 1

 Standard telegram 2

 Standard telegram 3

 Standard telegram 5 (only with SIMATIC S7-1500(T))

 Siemens telegram 102

 Siemens telegram 105(only with SIMATIC S7-1500(T))

Siemens telegram 105 is the default telegram for SINAMICS V90 PN. Telegram 1

will be used in this basic application.

3.2 Basic parameter configuration regarding SINAMICS

V90 PN

3.2.1 Configure PROFINET settings via SINAMICS V-ASSISTANT

The following parameters can be configured with the SINAMICS V-ASSISTANT

from the PROFINET settings menu field:

In this menu filed, you can configure:

 Communication telegram: in this tab you can also check the PZD

structure and values:

Other manuals for Siemens SINAMICS V90