Siemens SINAMICS V90 - Industrial security

5 Operation of the application
5.2 Scenario B
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898, V1.0, 07/2016
23
 Siemens AG 2016 All rights reserved
Nr.
Action
Remarks
2.
Insert or drag FB285 <SINA_SPEED> into the PLC main
block (OB1) and make program as follows:
The LAddrSP is the IO address on the
SIMATIC S7-300 of the set point slot;
and the LAddrAV is the IO address on
the SIMATIC S7-300 of the actual
value slot.
3.
Switch to online mode and activate the monitoring
function.
4.
Modify M10.0 to 1 and then the motor starts running at
the speed of 100 rpm.