Additional references
● Further information on the "SINUMERIK Operate" operating software can be found in the
following reference:
SINUMERIK Operate Commissioning Manual (IM9)
● For further information on "SINUMERIK Integrate", please refer to:
SINUMERIK Integrate MMP, MMT, AMC, AMP, AMM/E, AMD Commissioning Manual
Additional information regarding MindSphere applications is available at the following links:
MindSphere (
https://support.industry.siemens.com/cs/de/en/view/109742256)
MindSphere documentation (https://documentation.mindsphere.io/index.html#/kiosk/de)
Additional information
When connecting SINUMERIK controls that are not of the current generation, special attention
must be paid to security requirements.
The security requirements of MindSphere according to the state of the art must be considered
for such controls and ensured with further measures and network components within the local
IT environment.
● It must be ensured that the communication between the factory network and MindSphere
meets the current security standards, e.g. TLS 1.2.
● It must be ensured that unauthorized access to the control in the company network / factory
network environment and attacks on the firewall in front of the control are not possible.
● It must be ensured that communication inside the factory network environment cannot be
attacked.
The guidelines of the customer's IT department must be followed.
Introduction
3.2 System requirements
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB 17
To Next Page
Loading...
