5. The "PuTTY Key Generator" window opens.
The key is displayed.
– In the "Actions" area, click "Save private key".
6. The new file, e.g. "id_rsa_PUTTY.ppk", is now created.
4.5.6.4 Connect to the IoT2040 using the private key
Requirement
Create the connection to the IoT2040 either with WinSCP or with PuTTY once you have
installed the private key, e.g. "id_rsa_PUTTY.ppk".
You will find further information in the following chapter: Generating the private key in PuTTY
format (Page 91).
Installation/configuration
4.5 SIMATIC IoT2040
Manage MyMachines /Remote - installation in existing control environments
94 Application examples, 10/2018, A5E45211403B AB
To Next Page
Loading...
