The following settings are valid:
● /usr/local/apache2/conf/httpd.conf
● /usr/local/apache2/conf/extra/httpd-vhosts.conf
● All settings that you configured, for example, with your SINUMERIK control.
Permanent proxy connection
The proxy connection is permanent and also remains after a warm restart or reboot.
The example data is used for the following commands; adapt your inputs with your company
data.
1. Navigate to the "etc" directory.
2. Open the "profile" file.
3. Add the following lines:
export http_proxy="http://123.124.125.126:4321"
export https_proxy="https://123.124.125.126:4321"
4. Add the following line (as penultimate line) at the end of the file:
"umask 022"
Company proxy with user authentication
If your company proxy requires user authentication, proceed as follows:
1. Navigate to the "etc" directory.
2. Open the "profile" file.
3. Add the following lines:
export http_proxy="http://username:password@123.124.125.126:4321"
export https_proxy="https://
username:password@123.124.125.126:4321"
Replace "username" with your user name, and "password" with your password.
4. Add the following line (as penultimate line) at the end of the file:
"umask 022"
Company proxy error correction
If problems occur with your particular environment:
● Try to find a solution that works for Linux, in particular in the Yocto project.
Because every company network reacts differently, it is not possible to provide a solution for
every situation.
Installation/configuration
4.5 SIMATIC IoT2040
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB 43
To Next Page
Loading...
