EasyManua.ls Logo

Siemens SINUMERIK 840D pl - Page 70

Siemens SINUMERIK 840D pl
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
# General setup for the virtual host DocumentRoot "/usr/local/
apache2/htdocs"
#ServerName www.example.com:443
#ServerAdmin you@example.com ServerName IoT2040:443
ErrorLog "/usr/local/apache2/logs/error_log"
TransferLog "/usr/local/apache2/logs/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM-encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate, you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate that can also be configured in
# parallel.
SSLCertificateFile "/usr/local/apache2/ssl_cert/certificate.pem"
SSLCertificateFile "/usr/local/apache2/ssl_cert/certificate.pem"
#SSLCertificateFile "/usr/local/apache2/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you have both a RSA and a DSA private key, you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/usr/local/apache2/ssl_cert/key.pem"
#SSLCertificateKeyFile "/usr/local/apache2/conf/server-dsa.key"
#SSLCertificateKeyFile "/usr/local/apache2/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM-encoded CA certificates that form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/usr/local/apache2/conf/server-ca.crt"
Installation/configuration
4.5 SIMATIC IoT2040
Manage MyMachines /Remote - installation in existing control environments
70 Application examples, 10/2018, A5E45211403B AB

Other manuals for Siemens SINUMERIK 840D pl

Related product manuals