5.3 Inserting the certificate at the client with HMI-Advanced
If you operate your SINUMERIK controller in local mode, insert the root certificate into the
"cacerts.pem" file.
Procedure
1. Open das Start menu > Run and open "MMC" (Microsoft Management Console).
2. The "Console1 - [Console Root]" window opens.
– Open the "File" menu.
– Click on the "Add/Remove Snap-in..." function.
Setting up an encrypted connection
5.3 Inserting the certificate at the client with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
120 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
