Procedure
1. Copy the "sinintclient.tgz" file to the USB flash drive.
2. Insert the USB flash drive into the NCU.
3. Start the NCU.
4. In the menu, select "Update NCU Software and Data" with the cursor keys and press the
"OK" softkey.
Installing SINUMERIK Integrate
7.1 SINUMERIK Integrate with SINUMERIK Operate
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
148 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
