7. The selected file is displayed.
Press the "OK" softkey to confirm your selection.
- OR -
Press the shortcut key <Shift> + <F8> on the operator panel.
8. A confirmation prompt appears.
Press the "OK" softkey to confirm the confirmation prompt.
- OR -
Press the shortcut key <Shift> + <F7> on the operator panel.
Installing SINUMERIK Integrate
7.1 SINUMERIK Integrate with SINUMERIK Operate
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
150 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
