12.If you select "HMI softkey to start the product on the machine", the "Available Hotkeys"
window opens.
From the drop-down list, select the position of the softkey with which you want to start the
application on the user interface.
Click "Next >".
- OR -
If you selected "Expert mode" installation type, the "Choose Destination Location" window
opens.
The installation directory is displayed.
If you want to use a different directory, click "Change..." and enter the required directory.
Installing SINUMERIK Integrate
7.2 SINUMERIK Integrate with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
158 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
