15.The "SINUMERIK Integrate URL Configuration" window opens.
Enter the following web service:
– Server port (http://<ipadress>:SERVERPORT/Platform/SinInt.MhComm.Service/
MHComm/MHComm.asmx)
- OR -
– Platform (https://<ipadress>/Platform/SinInt.MhComm.Service/MHComm/
MHComm.asmx)
16.In the following prompt, you are requested to check the address settings.
Confirm the prompt to check the Internet settings with "OK".
Installing SINUMERIK Integrate
7.2 SINUMERIK Integrate with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
160 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
