1)
During operation, make sure that there is sufficient free storage space in your database, e.g. if you collect tool statistics data
from up to 150 machines for 2 years.
2)
Installation on a server system with remote database is supported.
3)
Can be deployed only with Windows Server 2012 R2 (x64) standard en-US!
4)
Can only be used with Windows Server 2016 R2 (x64) standard en-US
5)
No details regarding the processor and operating system, because these parameters are defined by the hardware
components
6)
SINUMERIK Operate Service Pack supports all hotfix versions
7)
For compatibility with SINUMERIK Integrate (in SINUMERIK Operate) and the latest versions, refer to the following tables
8)
The number of clients supported depends on additional parameters. For example: The more tool changes that take place,
the fewer clients are supported.
9)
Only supported on a separate server.
10)
Encrypted connection is supported with a proxy solution.
Software
SINUMERIK Op‐
erate
SINUMERIK Integrate Client 2.00
02.00.00.00.03
0
02.00.01.00.02
8
02.00.04.00.01
0
02.00.07.00.06 02.00.12.00.01
1
02.00.14.00.01
5
4.5 SP4 X X
4.5 SP5 X X
4.5 SP6 X X
4.5 SP6 from
HF8
X X
SINUMERIK
Operate
SINUMERIK Integrate Client 3.00
03.00.04.00.0
45
03.00.04.00.0
45
03.00.06.00.0
22
03.00.10.00.0
32
03.00.11.00.0
24
03.00.12.00.0
12
03.00.14.00.0
18
4.7 SP2 X X
4.7 SP3 X X
4.7 SP4 X X
4.7 SP5 X X
4.7 SP6 X X
4.7 SP7 X X
4.8 SP2 X X
4.8 SP3 X X
4.8 SP4 X X
4.8 SP5 X X
SINUMERIK Operate
HW NCU
SINUMERIK Integrate Client 3.00
03.00.12.00.012
4.7 SP2 x
4.7 SP3 X
Introduction
2.2 System prerequisites
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
18 Installation Manual, 12/2019, A5E44672080B AE
To Next Page
Loading...
Need help?
General
