Siemens SINUMERIK 840D Installation Manual

Operating system settings
Check the following settings of your operating system:
1. Select "Start" > "Control Panel" > "Regional Settings".
2. Open the "Location" tab.
The setting "United States" must be selected in the "Home location" drop-down list.
3. Open the "Administrative" tab.
In the section "Language for non-Unicode programs", the language "English (United
States)" must be selected for programs that do not support Unicode.
Introduction
2.2 System prerequisites
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 21

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB